Pipe Caps DIN 28011

DIN 28011 applies for one-piece heads with and without welding seam with an external diameter of Da ≤ 4000 mm and nominal wall thickness of s ≤ 50 mm.

A cap is applied in order to shut down both the ends of a pipe. All DIN 2617 Cap Dimensions are available with us and is sometimes also used for other commitments. The large variations of caps, are ellipsoidal or dished heads. These DIN 2617 Cap Material caps are used to close pipes of large diameters, and are similar to those used for constructing vessels.

Air Pollution Control- Scrubbers for Coal-Fired Power Plants
Seawater Cooling Devices
Architectural railings
Wiring In Electrostatic Precipitators
Oil Refinery
Gas Scrubbing Plants
Pulp and Paper Processing Industries
Acetic, Phosphoric and Sulphuric Acid Processing Plants
Oil and Gas Production – offshore process equipment Offshore, sea water technology, chemical industry, good stability against reducing acids of medium strength like sulphuric acid and phosphoric acid and various chloric media, refinery, paper industry, pulp industry

Properties of DIN 2617 Cap

Excellent corrosion resistance in a wide range of atmospheric environments
Good oxidation resistance in intermittent service to 870°C and in continuous service to 925°C
Good resistance to carbide precipitation
Good machining properties
DIN 2617 Cap offers higher strength at elevated temperatures
Excellent weldability with and without filler metals

Product Attributes

Carbon steel caps manufactured using superior grade raw materials. Carbon steel caps are used for connecting pipes of different diameters and find wide applications in various chemicals, construction industries, paper, cement & ship builders.

End Connection: Butt Weld
Body Material: Carbon Steel
Body Material Spec: ASTM A234 WPB
Schedule: Sch 40 (Std)
Specification: B16.9
Specification Type: ANSI

Features

End Caps are used for connecting pipes of different diameters and find wide applications in various chemicals, construction industries, paper, cement & ship builders.

Pipe caps are widely well-known for the utmost output and outstanding results that it gives.

It is commonly made from the one steel plate, so it should be seamless. The pipe end caps are available in various shapes, like the hemispherical, oval, round etc.

ASME B16.9 Standard covers overall dimensions, tolerances,ratings, testing, and markings for factory-made wrought buttwelding fittings in sizes NPS 1⁄2 through NPS 48 (DN 15 through DN 1200).